Attention should be paid to the utilization of rehabilitation machine for Apoplectic Hemiplegia

2020-08-29505

  At present, the rehabilitation exercise of stroke patients with hemiplegia is mainly carried out in the following ways: the patient is supported by the guardian, walking slowly on the road, so as to achieve the purpose of rehabilitation exercise. Practice has proved that this method of rehabilitation exercise has the following problems: first, because the patient needs special supervision, the guardian is laborious. Next, we will introduce the utilization of stroke hemiplegia rehabilitation machine The point of attention.


  

At present, the rehabilitation exercise of stroke patients with hemiplegia is mainly carried out in the following ways: the patient is supported by the guardian, walking slowly on the road, so as to achieve the purpose of rehabilitation exercise. Practice has proved that this method of rehabilitation exercise has the following problems: first, because the patient needs special supervision, the guardian is laborious. Next, we will introduce the utilization of stroke hemiplegia rehabilitation machine The point of attention. Stroke hemiplegia rehabilitation machine includes umbrella pole, umbrella bone, umbrella surface, fecal receiving box, horizontal bearing, horizontal main rotating arm, vertical main bearing, horizontal driven rotating arm, vertical slave bearing, vertical rotating arm, spring and belt clamp.


The umbrella surface is installed on the upper end of the umbrella shaft through ribs, and the lower edge of the umbrella surface is provided with a ring-shaped inward protrusion. The inner end of each horizontal main rotating arm is vertically fixed on the outer surface of the outer ring of the horizontal bearing, and each horizontal main rotating arm is equidistant around the umbrella shaft.


The number of vertical main bearing is the same as that of horizontal main rotating arm. The inner ring of each vertical main bearing is fixed on the outer end of each horizontal main rotating arm in a one-to-one manner. The number of horizontal driven rotating arms and vertical driven bearings are consistent with the number of horizontal main rotating arms. The inner ring of each vertical driven bearing is fixed on each horizontal driven rotating arm in a one-to-one manner The inner end of.


Telephone consultation
Product display
News and information
QQ customer service